Colorimetric and turbidimetric analysis of endotoxins using the absorbance detection mode
Torn between a colorimetric or turbidimetric LAL assay? Whichever path you take, BMG LABTECH’s absorbance readers deliver dependable results every time.
VANTAstar®는 가장 최근에 출시된 모델입니다, 사용법을 단순화하고 원하는 기능을 자유롭게 선택할 수 있게 디자인하였으며, 복잡한 절차없이 결과를 쉽게 분석할 수 있습니다. 당사의 특허인 LVF Monochromators™ 시스템, Filter, UV/vis 분광계 및 Enhanced Dynamic Range 기술이 탑재되어 기초 연구 및 생명 과학의 보다 광범위한 응용 분야에 적용할 수 있습니다.

VANTAstar는 최대 384개의 웰까지 플레이트를 사용할 수 있으며, 원하는 기능을 업그레드할 수 있습니다. EDR(Enhanced Dynamic Range) 기술, 자동 초점 조절 및 발광 측정시 간섭 효과를 최소화하여, 어느 장비보다도 자동화되어 최적의 결과 획득할 수 있는 단순화된 장비입니다.
가스 제어를 위한 가스 제어 장치, 온도 조절, 다양한 쉐이킹 선택 기능, 웰 스캔 기능, 그리고 온도 조절 기능과 교반기가 장착된 인젝터를 통해 VANTAstar는 모든 살아있는 세포 기반 분석을 지원합니다. VANTAstar는, 또한, 필터만 사용하여 측정할 수 있습니다. VANTAstar F에 대한 자세한 내용은 여기에서 확인하세요.
VANTAstar는 이제 BMG LABTECH의 새로운 마이크로플레이트 리더 제어 인터페이스인 Voyager와 함께 제공됩니다. 복잡성을 줄이면서 유연성을 극대화하도록 설계된 Voyager는 데이터 수집을 그 어느 때보다 직관적으로 만듭니다.
VANTAstar는 연구용으로만 사용됩니다.


Torn between a colorimetric or turbidimetric LAL assay? Whichever path you take, BMG LABTECH’s absorbance readers deliver dependable results every time.
Unlocking Nature’s Timekeepers. Learn how to read the internal clock of organisms and how to decode life’s 24-hour rhythm at the molecular level using a microplate reader.
Streamline your workflow and double your insights: multiplexing cellular signal responses of multiple second messengers in a single measurement saves valuable time and conserves reagents.
Perform the PYROSTAR ES-F/Plate LAL test your way— BMG LABTECH readers support both turbidimetric and nephelometric evaluation for maximum flexibility.
Are you a fan of the monocyte activation test for endotoxin tests, but would like to speed up the testing process? Read here how the LumiMAT test and BMG LABTECH readers can support you.
Do you want to make your MIC measurements more efficient and automated? Find out here how BMG LABTECH microplate readers can support you in this task.
Fluorescence intensity (incl. FRET)
Fluorescence polarization
Luminescence (flash and glow) - incl. BRET
Time-resolved fluorescence
TR-FRET
UV/vis absorbance spectra
Top and bottom reading
Endpoint and kinetic
Sequential multi-excitation
Sequential multi-emission
Spectral scanning (fluorescence, luminescence, absorbance)
Ratiometric measurements
Well scanning
6- to 384-well plates, user-definable
LVis Plate with 16 low volume microspots (2 μL)
Robot compatible
High energy xenon flash lamp
Low-noise photomultiplier tube
CCD spectrometer
Dual Linear Variable Filter (LVF) Monochromators™
Linear Variable Dichroic Mirror
Separates ex & em LVF Monochromators
Optical filters:
Ex and em slides hold up to 5 filters each
LVF Monochromators + optical filters
Use one for ex and the other for em
UV/Vis absorbance spectrometer: Full spectra or 8 distinct wavelengths in < 1 sec/well
Filters
FI, LUM, TRF, FP, TR-FRET: 240 - 740 nm
LVF Monochromators™
FI, LUM: 320 - 740 nm
Linear Variable Dichroic
340 - 740 nm
Spectrometer
ABS: 220 - 1000 nm; wavelength precision: ≤ 0.5 nm
FI filters
(top)
< 0.5 pM (< 10 amol/well FITC, 384sv, 20 μL).
FI filters
(bottom)
< 2.5 pM (< 125 amol/well FITC, 384g, 50 μL).
FI monochromator
(top)
< 0.8 pM (< 16 amol/well FITC, 384sv, 20 μL).
FI monochromator
(bottom)
< 3.5 pM (< 175 amol/well FITC, 384g, 50 μL).
Dynamic Range: 8 decades in a single measurement.
FP
< 1.2 mP SD at 1 nM FITC (384sv, 20 μL).
HTRF®
(black and white microplates)
Reader Control Kit (Eu) after 18h (384sv, 20 μL).
Delta F > 700% (High Calibrator).
Delta F > 25% (Low Calibrator).
TRF
< 30 fM europium (< 2.4 amol/well, 384, 80 μL).
LUM
< 0.8 pM (< 15 amol/well ATP, 384sv, 20 μL).
Dynamic range: 8 decades in a single measurement.
ABS with spectrometer
Selectable spectral resolution: 1, 2, 5, and 10 nm.
OD range: 0 to 4 OD; photometric resolution: 0.001 OD.
Accuracy: < 1% at 2 OD.
Precision: < 0.5% at 1 OD and < 0.8% at 2 OD.
Linearity: ≤ 0.8% at 2.0 OD.
Flying mode (1 flash)
9 sec (96), 16 sec (384)
Linear, circular and double-circular with user-definable time and speed
+4 °C above ambient up to 45 °C or 60 °C
Minimum condensation concept: the upper heating plate of the incubation chamber operates at +0.5 °C than the lower plate, heated optic system
Multi-user reader control (SMART Control and Voyager) and data analysis software (MARS).
FDA 21 CFR Part 11 compliance available with SMART Control and MARS.
Integrated fluorophore library.
Width: 35 cm, depth: 52 cm, height: 36 cm; weight: 27 kg
Excitation and emission slides for up to 4 filters each for monochoromator units (VANTAstar), and for up to 5 filters each for filter-only units (VANTAstar F)
Top and bottom: free-air optical light path guided by motor-driven mirrors and dichroics
Automatic focal height adjustment (0.1 mm resolution)
Up to 2 reagent injectors
Individual injection volumes for each well: 3 to 500 μL (optionally up to 1 mL)
Variable injection speed up to 420 μL/s
Reagent back flushing
Heater and stirrer plate
Dimensions: width: 13 cm, depth: 31 cm, height: 26 cm; weight: 6 kg
Sample capacity: sixteen separate microdrop wells for 2 µL samples; one standard cuvette position for up to 1 mL samples
Quality Control Internal Standards (optional): four NIST traceable optical density filters (approximate values of 0.1, 0.3, 0.6 and 1.0 OD); one holmium oxide filter for wavelength accuracy
Dimensions: conforms to SBS standards for microplates
Microplate incubator and shaker
Actively regulates O2 and CO2 - 1-20%
Excitation and emission filters
Upgrades to include options such as additional detection modes, reagent injectors, extended temperature control, etc. are available
Please contact your local representative for more information
LOD = 3 x SD (20 blanks) / slope (6 pt std curve)
96 = 96-well microplates
384sv = 384-well small volume microplates
384g = 384-well glass bottom microplates
The VANTAstar is for research use only.
Intelligent microplate incubation
Low-volume measurements
Filters for a wide range of applications
Functional Microplate Reader Validation
Enhanced cell-based assays