THERMOstar - Intelligent Microplate Incubation

The THERMOstar is a high performance microplate incubator and orbital shaker which accommodates up to four microplates. The THERMOstar can be used for any enzyme or cell-based assays requiring uniform and strictly controlled incubation up to 56°C and effective mixing.

Temperature, shaking speed, and incubation time are fully programmable via the keypad, while the status parameters are displayed on the LCD in real time via an easy to use interface.

Microprocessor controlled heating plates above and below the microplates provide uniform temperature with less than 1.0°C variation between any two wells. This ensures outstanding and repeatable assay performance.

Features:

• Heating plates above and below the microplates


• User definable parameters - temperature, RPM, and time


• Shakes and incubates four microplates simultaneously


• Incubation up to 56°C in 1°C steps


• Excellent temperature accuracy and uniformity across the plate

The THERMOstar can be used in as an accessory for all BMG LABTECH microplate readers.

Temperature Control	Incubation range from + 8°C above ambient to 45°C (optional: 56°C) in 1°C steps Temperature stability ± 0.2°C Temperature gradient < 1.0°C across the plate
Set Point Time	< 20 min from 25°C to 37°C
Capacity	Up to 4 microplates Max. microplate dimensions: Width: 8.9 cm, Length: 13.3 cm, Height: 2.3 cm
Shaking	0.75 mm orbital radius Shaking range from 120 to 700 rpm Interval shaking (range from 0 to 18 h in 1s steps) or Continuous shaking - no time limit
Humidity	Max. 85 %
Power Requirements	115/230 V, 60/50 Hz, max 90 VA
Dimensions	Width: 33.5 cm, depth: 40.5 cm, height: 17 cm Weight: 9 kg

Not all of the features mentioned above are available in the basic units or in all detection modes. Optional accessories may be necessary to perform certain assays. Please contact your local distributor for details.

Videos:
Downloads:

Click on the readers below to choose the instruments that you would like to compare to the THERMOstar. Then press "Go" to start the comparison.
Please note that the order in which you click the products will be the order in which the products are shown.