- FLUOstar® Omega microplate reader quantiﬁ es nucleic acids for NGS applications
- Fluorescent nucleic acid quantiﬁcation performed in high throughput
- Integrate quantiﬁcation in the automatic workﬂow of NGS sample preparation
Table of contents
Next generation sequencing (NGS) technology and applications are rapidly evolving leading to highly increased sampling frequency. Accurate ﬂuorometric quantiﬁcation of nucleic acids is one of the key qualiﬁcation parameter in gating samples through the preparation workﬂow. Given the high and diverse sample number this represents a major challenge (Figure 1).
Here we show that combining Qubit assays with the FLUOstar® Omega multi-mode plate reader is ideally suited for high-throughput sample quantiﬁcation that directly impacts quality of deep sequencing experiments. The assay is fast, precise and straightforward and can be easily included in automated library preparation systems. Figure 1 represents a typical, quality controlled NGS workﬂow. Depending on the assay (WGS, ChIP-Seq, RNA-Seq etc.) DNA or RNA analytes are ﬂuorometrically quantiﬁed and quality, together with integrity parameters, is evaluated. In a second step, sequencing libraries are constructed and successful preparation validated using ﬂuorometric DNA quantiﬁcation in combination with capillary electrophoresis. Prior sequencing, libraries are pooled to facilitate multiplex sequencing and pools are loaded on a sequencing instrument for analysis. Percentage of DNA amount of each library in a pool as well as total amount of DNA loaded on a sequencing instrument directly inﬂuences quality of each sequencing experiment and sequencing run, making precise quantiﬁcation at any step of the workﬂow fundamental.
For speciﬁc and sensitive ﬂuorometric quantiﬁcation of a wide range of samples Qubit assay kits have become gold-standard in NGS applications. The nucleic acid quantiﬁcation kits provide ﬂuorophores that speciﬁcal bind dsDNA or RNA and subsequently enhance their ﬂuorescence. The ﬂuorescence intensity correlates with the amount of dsDNA or RNA and is used to calculate the nucleic acid concentration. Qubit chemistry is typically detected directly in a sample tube on a Qubit ﬂuorometer. Therefore, Qubit cannot be integrated into an automatic workﬂow. Transfer of the reaction to a microplate opens the possibility to use the Qubit ﬂuorescent dyes for automated nucleic acid quantiﬁcation.
Materials & Methods
- Qubit dsDNA HS Assay (ThermoScientiﬁc, Q32854))
- Qubit RNA HS Assay (ThermoScientiﬁc, Q32855)
- Qubit RNA BR Assay (ThermoScientiﬁc, Q10210)
- Qubit Assay tubes (ThermoScientiﬁc, Q32856)
- 96-well plates, black, F-bottom (Greiner bio-one, 655076)
- Qubit® single tube ﬂuorometer (ThermoScientiﬁc) FLUOstar® Omega (BMG LABTECH)
DNA/RNA samples were diluted with the respective Qubit® working solution either in Qubit® assay tubes or into 96-well microplates. Measurement volume was for all assays 200 µl including a 10 µl standard and 2 µl or 1 µl sample. In microplates samples and Qubit working solution were mixed by pipetting using a 300 µl 8-channel pipette. After 2 minutes incubation, ﬂuorescence intensity was detected using the FLUOstar Omega multi-mode plate reader (BMG LABTECH) or the Qubit® single tube ﬂuorometer. In case of the FLUOstar Omega data was exported as standard excel.
|Optic settings||Fluorescence intensity, top optic, endpoint|
|General settings||Number of flashes||20|
|Settling time||0.5 s|
Results & Discussion
DNA sequencing libraries and total RNA samples were quantiﬁed using the FLUOstar Omega microplate reader or the Qubit® single tube ﬂuorometer. Plate reader measurements were conducted in duplicate and standard deviation of technical replicates automatically calculated using the MARS analysis software package. For both, DNA and RNA quantiﬁcation, measurements agree very well between the different ﬂuorescence detection devices (Figure 2). The FLUOstar Omega enables simple replicate analysis thus enhancing measurement precision. Quantiﬁcation assays can easily be carried out using multichannel pipetting to increase throughput and enable seamless integration into liquid handling systems.
Scarce samples (low volume, low concentration) are typical challenges for accurate quantiﬁcation. We compared quantiﬁcation of rare (low input/low volume) RNA samples on both the FLUOstar Omega multi-mode plate reader and the Qubit® single tube ﬂuorometer. While the Qubit instrument only measured concentration in a fraction of the analyzed samples the plate reader detected RNA concentration in all measured samples (sample volume for measurement: 1 µl) demonstrating superior sensitivity.
The NGS sample preparation laboratories are conducting nucleic acid quantiﬁcation assays on a daily basis but technology that provides adequate throughput and precision remains a challenge.
Here we show that combination of Qubit assays with the FLUOstar Omega multi-mode microplate reader is ideally suited to measure a wide range of nucleic acids and improves compared to the single tube ﬂuorometer on sensitivity, precision and speed. Especially large laboratories that perform automated high throughput sample preparation will proﬁt from this technology.